Components / EMC Products / Power Entry Modules with Filter / GRM2
GRM2 General Information shop
Shop
pdf
pdf-datasheet

Order Number: toset


EMV Power Entry Modules with Filter: IEC Appliance Inlet C14 with Line Switch, Fuseholder 1- or 2-pole, Voltage Selector (series-parallel), "Lock and Shield" Mounting,



Phase-Out_Logo
GRM2
GRM2: only with shield, without line filter
C14
Connector Logo
70° C
Environment_Safety RoHS   Environment_Safety China-RoHS Approval marks cURus   Approval marks ENEC 10

Description

Description

- Panel Mount: Snap-in version from rear-side
- 5 Functions: Appliance Inlet Protection class I, Line Switch 2-pole, with or without Fuseholder for fuse-links 5 x 20 mm, with or without voltage selector, with EMC-shield

Approvals

- VDE Certificate Number:40024784
- UL File Number:E93617

Characteristics

- Ultra-compact design
Time saving “Lock and Shield” snap-in design for rear-panel mounting
- All single elements are already wired
- Fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user
- Voltage selector for two voltage ranges
Innovative EMC-shielding with flexible steel segments for an excellent contact to the panel
- Insulation cover on the rear-side
- Suitable for use in equipment according to IEC/UL 60950

Other versions on request

- Panel thickness 1.0 / 2 / 2.5 mm (max.)
- Fuseholder 1�?�pole
- Line switch 1-pole
- Voltage selector with other marking

References

This type is Phase-out without alternate type
Last order date: 30.09.2013

Weblinks

pdf-datasheet, General Product Information , Approvals, CE declaration of conformity, RoHS , CHINA-RoHS , Mating Connectors , e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, CAD-Drawings , Accessories , Product News , Detailed request for product

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

Top

Technical Data

Ratings IEC 10 A @ Ta 40 °C / 250 VAC; 50 Hz
Ratings UL/CSA 10 A @ Ta 40 °C / 125 VAC; 60 Hz
Dielectric Strength > 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
Allowable Operation Temp. -25 °C to 85 °C
Climatic Category 25/085/21 acc. to IEC 60068-1
Degree of Protection [?] from front side IP 40 acc. to IEC 60529
Protection Class Suitable for appliances with protection class I acc. to IEC 61140
Terminal Quick connect terminals 4.8 x 0.8 mm
Solder terminal on request
Solder terminals for voltage selector
Panel Thickness s Snap-in: 1.5 mm
(other on request)
Material: Housing Thermoplastic, black, UL 94V-0
Appliance-Inlet/-Outlet C14 acc. to IEC 60320,
UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I
Fuseholder 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
Rated Power Acceptance @ Ta 23 °C 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole
Power Acceptance @ Ta > 23°C Admissible power acceptance at higher ambient temperature see derating curves
Line Switch Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1
Technical Details
Voltage Selector optional, jumper, 2 pos.
MTBF > 1'400'000 h acc. to MIL-HB-217 F
Top

Dimension

Dimension

GRM2
GRM2_Massbild_Mehransicht
Top

Assembly Instructions

Step 1
GRM1_GRF2_Massbild_Montage_Schritt1
Place the socket in top edge of the panel cut-out.
Step 2
GRM1_GRF2_Massbild_Montage_Schritt2
Push the socket upwards.
Step 3
GRM1_GRF2_Massbild_Montage_Schritt3
Push the socket forward into the panel cut-out.
Step 4
GRM1_GRF2_Massbild_Montage_Schritt4
Release the socket. The component is self adjusting.
Top

CAD


Electrical Data

Diagrams

Voltage selector
GRM2_GRM4_Spannungswähler
GRM2
GRM2_Schaltbild
1) Line2) Load
Top

Derating Curves

1-pole
Admissible power acceptance in Watt
Derating_2W_1pol_GST
Ambient air temperature Ta °C
2-pole
Admissible power acceptance in Watt per pole
Derating_1.6W_2pol_GST
Ambient air temperature Ta °C
Top


Variants

Tabel of Variants

Basic version:
- Marking of the voltage selector 115/230
- with housing and cover on the rear-side

Rated Current [A] Filter-Type Fuseholder Line Switch Voltage Selector Order Number A=Most Popular [?] MOQ [?] PU [?] e-Shop [?] SCHURTER Stock Check [?] Distributor Stock Check [?]
         
10 without - 2-pole GRM2.1160.013 1 20 » » »
10 without - 2-pole GRM2.1161.023 1 20 » » »
10 without 2-pole 2-pole GRM2.1180.013 1 20 » » »
10 without 2-pole 2-pole GRM2.1181.023 1 20 » » »
Availability for all products can be searched real-time: http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Top

Packaging unit

20 Pcs 

Mating Components

Category / Description
4787, SGE GST, PG07, Gerätesteckdose 10A Frontplatte s/w
Appliance Outlet Overview complete
0102, SGE GST, PG07, G-Steckdose 10A/für Kabel
Connector Overview complete
Top

The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. 22.03.2014