The new 5008 series combines an IEC C8 inlet with a line filter for low power applications. The EMI filter is dimensioned as a 1-stage filter for rated currents up to 2.5 A according IEC respectively 6 A according UL and available as standard or medical version. The integrated EMC filtering mounts directly at the point of power entry, ensuring an optimal effect on the electromacnetic compatibility performance of the unit.
Mounting options include screw-on or snap-in mounting. The snap-in mounting technique reduces the assembly costs considerably for reduced handling and ease of assembly. The connection is made with quick-connect terminals. Optional solder terminals are also available.
The unit is designed for use in IT, medical and home applications appliances. The 5008 is the optimal solution, combining uncompromised features and performance with compactness of design to meet the increasing demands in cost efficiencies and ecological concerns. The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.
The rated voltage of the DKFP compensated chokes is 250 VAC. The chokes are designed for temperatures of between -40 °C and 125 °C. The chokes are available in vertical or horizontal versions. The DKFP current compensated chokes are highly effective in suppressing common-mode interference. The DKFP current compensated chokes may be used in line filter circuits, frequency converters, switch-mode power supplies and solar converters.
Phone: +41 91 640 0794
The FMBC NEO 3-phase filters are arranged for use with 3x 277/480 VAC and 3x 300/520 VAC installations and the FMBD NEO 3-hase filters with neutral are arranged for use with 3x 300/520 VAC intallations. The FMBC NEO filter is available from 7A and the FMBC NEO filter is available from 8A.
These new compact EMC filters in NEO design are especially suited for use in drive systems, engineering installations and places where frequency inverters cause electromagnetic disturbances.
With these new 3-phase power line filters, SCHURTER focuses on effective EMC solutions.
The series has UL Approvals. Approvals to ENEC have been applied for.
The SCHURTER Sine Wave Filters series FMAC SINE and FMAC SINE DCL are designed to convert output voltage wave forms produced by PWM frequency converters into low distortion sine wave forms for motor drive and power transformation applications.
The SCHURTER Sine Wave Filters series FMAC SINE and FMAC SINE DCL are designed for use with 500 VAC installations and currents from 4A upwards. The SCHURTER Sine Wave Filters are suited to a wide variety of applications including frequency converters in uninterruptible power supplies, elevators, heating-, ventilating- and air conditioning systems, traction and conveyer systems.
SCHURTER’s first of its kind power entry module, series 5707, now offers IP 54 protection at the power input, in addition to IP 65 protection to the equipment. The sealed module is ideal for use in medical equipment exposed to leaks, drips and spills, as well as equipment subject to routine washing.
The compact module combines an appliance inlet, fuseholder, and standard or medical EMC filter rated up to 8 A at 250 VAC. The original 5707 offers IP 65 seal protection at the panel opening, around the fuseholders, and between the inlet and connector pins. The module can also be fitted with an additional gasket in the inlet cavity for IP 54 protection between the inlet and the cord connector. An optional retaining device prevents the power cord from unintentional disconnection.
The 5707 is cURus and ENEC approved. The appliance inlet complies with IEC/EN 60320-1; Fuseholders are shock-safe according to IEC/EN 60127-6, PC2. The module offers pre-wired electrical connections, using 6.3x0.8 quick connect terminals. Variations include: Class I, C14, or Class II, C18 appliance inlet; 1- or 2- pole fuseholders; front or rear mount mounting; Class I capacitors for increased voltage withstand. Delivery is stock to six weeks.
The new Power Entry Module EF12, the perfect combination of an appliance inlet, a line-filter and a circuit breaker for equipment suitable for high currents up to 16A IEC/EN, 20A UL/CSA!The EF12 contains: appliance inlet 16A according to IEC/EN 60320-1, circuit breaker for equipment and a line-filter (12/16 A IEC/EN; 12/16/20 A UL/CSA). The circuit breaker for equipment interrupts the electric circuit by overload current up to 20A, and works at the same time as a ON/OFF switch. Optional available: without overload protection, with a remote trip or undervoltage releaseThe additional EMV-shield helps to a troublefree function of your equipment. Further advantages are the reduction of the production costs due to the wired elements and the compact measurements of the EF12. Applications include higher power consuming equipment, like CAD systems, office automation equipment, industrial workstations, base stations, file servers, bar coding equipment and power supplies.
DA22, SCHURTER's latest power entry module (PEM) is built compact and provides maximum electrical power density. The unit offers optimal EMC filter performance, features built-in overload protection and ensures resource-saving mounting.
The DA22 product line, specifically designed for PCB mounting, combines an IEC appliance inlet, a fuse and a filter into one unit. Pre-wired, this product requires only minimal PCB space and can be mounted with very little time required for wiring.
This new PEM integrates EMC filtering and shielding directly at the point of power entry, which has an optimal effect on electromagnetic compatibility. Overload protection is provided by a 1-pole or
2-pole fuseholder for 5x20 fuse links.
The unit is screwed onto the appliance chassis' wall from the inside, the screw-on connection with the printed circuit board ensuring optimal mechanical safety.
DA22 is rated for currents up to 10 A at 125/250 VAC. The entire product line is ENEC and cURus approved and meets the requirements for appliances according to IEC 60950. The versions featuring Extrasafe fuseholders and medical appliance filters are ideally suited to medical appliances according to IEC 60601-1.
SCHURTER presents its new 3-phase line filters, series FMAC ECO and FMBC ECO. These compact and cost optimized filters are in ECO designed and especially suited for use in drive systems, engineering installations and places where frequency inverters cause electromagnetic disturbances.
The EMC filters are arranged for use with 480 VAC installations and are available in single or two stage versions. The FMAC ECO single stage filter is available from 10A, while the two stage
FMBC ECO filter from 8A. The FMBC ECO series has a leakage current of just 5 mA, making it ideal for use in installations equipped with residual current circuit breakers. The filters can be mounted lengthwise or upright which provides maximum flexibility in design.
With these new 3-phase line filters, SCHURTER focuses on costs savings while efficiently solving EMC problems. The series has ENEC approvals. Approvals to cURus have been applied for.
SCHURTER presents a breakthrough product, providing simple and universal EMC for high frequency applications, using X2Y® filter technology. Series 5150 possesses broadband suppression properties to 1 GHz and combines them with the most simple and universal power input. This integrated and compact design provides an easy, safe and cost effective alternative to existing market solutions and opens new opportunities in the filtering of high frequencies.
The SCHURTER 5150 series extends the application range of X2Y® filter technology from its origin in EMI protection of DC circuits into the area of AC power input. This filter technology combines the X and Y capacitors used in a typical mains filter into one component. The leads connecting the capacitors are thereby eliminated and parasitic impedances are reduced to a minimum. This results in broadband suppression into high frequency ranges.
The component is equipped with a C14 IEC connector. The double shielding between the X2Y® filter and filter casing, together with the broad metal flange can serve as an alternative for feed-through and multi-stage filters. Application examples include equipment for measure-ment engineering, data encryption, medical engineering, IT and telecommunications.
The compact package is designed for front- or rear-side mounting and meets rated currents requirements of up to 10A / 15A. For medical applications, SCHURTER has a version with reduced leakage current. The series has ENEC and cURus approvals, and is suitable for office and medical applications in accordance with IEC/EN 60950 and/or 60601-1.
Schurter’s new 20A IEC inlet with EMI filter, series 5130 ECO design, meets the increasing demands of IT, medical and industrial appliances. The new ECO design provides cost savings and maximum performance in a lightweight and environmentally friendly compact package. The 5130 combines an IEC C20 inlet with line filter in various mounting styles. The positive electrical contact of the broad metal flange to the chassis ensures optimal filtering and shielding. The units are available with current ratings 20A or 16A, depending on attenuation requirements. In addition to the standard version, medical filters with low leakage currents of <5A, as well as types with X1 and Y1 capacitors for enhanced withstand voltage, are also offered.
Mounting options include a front or rear version for traditional screw and nut mounting or rivet mounting. A version specifically for rear mounting features pre-formed threaded holes for M3 screws, which eliminates the handling of nuts and reduces labor costs. These benefits can also be achieved with the snap-in mounting style. Terminals accept 6.3x0.8 mm quick-connect tabs.
The increasing function and power density of todays IT, medical and industial applications leads to higher energy consumption. The 5130 ECO is the optimal solution, combining uncompromised features and performance with compactness of design to meet this growing demand.
The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.
SCHURTER’s IEC C14 inlet with EMI filter, series 5120 ECO design, meets the increasing demands of IT, medical and industrial appliances and is now also available as snap-in mounting version. The new ECO design provides cost savings and maximum performance in a lightweight and environmental-friendly package.
The series combines an IEC C14 or C18 inlet with line filter in various mounting styles. The EMI filter is dimensioned as a 1-stage filter for rated currents up to 15 A with a leakage current standard < 0.5 mA and medical < 5 µA. The positive electrical contact of the broad metal flange to the chassis ensures optimal filtering and shielding.
Mounting options include screw-on, rivet or snap-in mounting. The new snap-in mounting as well as the screw-on version from rear side with its pre-formed threaded holes reduces labor costs. The connection is made with quick-connect terminals.
The unit is designed for use in IT, medical and industrial applications. The 5120 ECO is the optimal solution, combining uncompromised features and performance with compactness of design to meet the growing demand regarding economy and ecology. The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.
Schurter extends its ECO filtered power entry module for DC applications, series 5003, with the snap-in mounting option. The ECO design provides cost savings and maximum performance in a lightweight and environmentally friendly compact package. Applications are in data critial environment such as IT, telecom and data encription but also in DC supplied industy automation.
The 5003 features a standard DC connector, offered in two different connector styles. The connector is encased with a 1-stage filter for currents up to 15 A at 125 VDC. The unit mounts to the equipment enclosure with a broad metal flange, thus providing a large contact area for optimal shielding and filter efficiency. Screw-on, snap-in and rivet mounting options are offered. Especially labor cost saving options are the screw-on type from rear side with its pre-threaded holes as well as the new snap-in type. The series is ENEC and cURus approved and complies with IEC/EN 60950, standard for office and IT equipment. Applications include telecom and IT infrastructure equipment, data encryption machines but any other DC supplied equipment in industry automation.
SCHURTER extends its portfolio of filters for DC applications with the introduction of series FMEB and FMEC. These filters as especially optimized for DC applications with technical features that support a broad range of applications.
The filters have a current rating of 30 A at 80 VDC. Typical applications are found in DC supplied IT and telecom infrastructures. When used in electrical cabinets of the branch or automation controls for the machine and transportation industries, the filters guarantee a safe operation by attenuating disturbances in the control and communication circuits.
The FMEB filter series is designed for a maximum operating voltage of 80 VDC, while the series FMEC offers connections for two polarities at maximum ±80 VDC.
The primary side is equipped with screw clamps and the secondary side with 6.3 mm x 0.8 quick connect terminals. The aluminum housing offers mounting straps to securely fasten the filter. The FMEB and FMEC filters are approved to ENEC and UL/CSA.
Technical Features:
- Current rating: 5 – 30 A
- Voltage rating: FMEB +80 VDC, FMEC ±80 VDC
- Terminals: screw clamps (primary), quick connect terminals 6.3 x 0.8 mm (secondary), other terminal configurations on request
- Approvals: ENEC, cURus
DD series is most compact power entry design for safe power input
Schurter announced today the new DD11 and DD12 power entry modules as an extension to their existing snap-in and pcb mount counterparts. The new addition with mounting flange is offered for applications requiring screw mounting to the panel.
The DD series provides up to four functions packed into a 49 x 30 mm space saving package. The additional mounting flange supports horizontal mounting, thereby optimizing space while providing maximum functionality. The inlet portion of the unit (according to IEC 60320-1, style C14 or C18), integrates a fuseholder, switch and optional standard or medical EMC filter.
The DD series is especially suited for medical applications, designed to comply with IEC 60601-2. The fusedrawers are offered as 1 or 2-pole and accept 5 x 20mm fuses. An extra-safe feature prevents users from removing the fusedrawer while the power cord is plugged into the equipment. The medical filter limits leakage current to 5 or 80 uA respectively. The M80 version provides increased attenuation of electro-magnetic interference, yet still meets the leakage requirements for non-patient contact devices. The 2-pole switch offers an inrush current peak of 100 A capacitive for 3 ms and is available in both illuminated and non-illuminated versions.
The series is rated for currents up to 8 A at 125 VAC 60 Hz by UL/CSA, and 10 A at 250 VAC 50 Hz by IEC/EN. It is also suited for use in applications as described in IEC 60950, such as measurement, office, security and data communications equipment. The compact design makes it ideally suited for use in low profile designs, especially 1RU enclosures for 19" racks, and IT and telecom infrastructures where equipment is continually downsized. Delivery is stock to 6 weeks.
SCHURTER's new series DD21 and DD22 power entry modules have been conceptually designed for PCB mounting. The DD21 product is equipped with multiple functions including inlet connector, switching and fusing. In addition, the DD22 series offers standard or medical filter versions. The compact design of this series makes them ideally suited for use in low profile designs, especially 1RU enclosures for 19" racks, and other IT and telecom infrastructures where equipment is continually downsized.
The DD series can be equipped with 1- or 2-pole fuseholders for 5 x 20 mm fuse-links. The 2-pole switch, which is designed for inrush current peaks of 100 A capacitive for 3 ms, is available in both illuminated and non-illuminated versions. The DD21 is rated for currents at 8 and 10 A, while DD22 series is rated for currents at 1, 2, 4, 6, 8, 10 A. The power entry modules fulfill IEC/EN 60950 requirements and are ENEC and UL/CSA approved up to 10 A 250 VAC 50 Hz and 8 A 125/250 VAC 60 Hz respectively. Special configurations such as protection class II (IEC 61140) arrangements or filters with special X1 capacitors for increased dielectric strength are available.
The DD series uses M3 or self-tapping screws for mounting onto a PCB or M3 screws for mounting from the rear of the housing. The compact series requires minimal space having a board footprint of 65 mm wide by 34.6 mm deep, and panel cutout of 28.1 mm x 47.1 mm. Applications for this product include industrial PCs, digital audio applications, network routers, analog televisions and battery charging equipment. Delivery is stock to six weeks.
Schurter's C20F, DC12 and KFA power entry module product lines are extended to include filter cases with a solid metal flange. The products are designed to panel mount from the rear side for better grounding and optimal EMC shielding. They also allow for pre-wiring of the module before installation. The metal flange provides an ideal solution over traditional modules with plastic flanges. The solid metal contact of the metal flange with the panel eliminates the possibility of having EMI-producing slot antennas around the module. The modules are mounted with screws or rivets. A version with pre-drilled, threaded holes eliminates the nuts, automating assembly and minimizing costs.
Today, metal enclosures are being replaced with metallized plastic enclosures in order to reduce the cost and weight of the unit for increased portability. Medical equipment, in particular, demands more functionality in less space, while at the same time meeting stringent EMC requirements according to IEC 60601-1. The new power entry modules are available with low leakage medical filters M80, version for use in applications with indirect patient contact and the M5, version for use in applications with direct patient contact. The modules are also available with standard filters designed for use in IT applications according to IEC/UL 60950, where high filter attenuation is required.
All products are approved according to ENEC () and UL
( ). Terminals are quick-connect 6.3 mm x 0.8 mm. Alternative options include wires (braided) or solder tabs. Additionally, the DC12 series, combining switch, inlet and filter is available in red or green illumination. Pricing for the modules vary, based on functionality.
Schurter announced today the new KFA snap-in power entry module as an adjunct to its popular screw mount counterpart. The elimination of mounting holes on the snap-in unit saves space and speeds assembly. The snapper design universally supports a range of panel thicknesses from 0.8 mm to 3.0 mm.
The KFA snap-in provides up to three functions, including an inlet, 1- or 2-pole shock-safe fusedrawer and EMC filter. The integrated unit provides a high performing, compact system for 1U devices where the load must be protected against overcurrent at the power source.
While the KFA series can be used in a variety of applications, it is especially suited for medical applications according to IEC 60601-2. The fusedrawers are offered as 1-pole, 2-pole, 1-pole with a spare fuse compartment, or 2-pole with a shorting bar in the neutral side. The 2-pole version provides additional safety by protecting both sides of the line - important when a non-polarized cordset is used. The fusedrawer is available in a finger-grip or extra-safe version. The extra-safe feature prohibits users from removing the fusedrawer while the power cord is plugged into the equipment. Standard or medical line filters are offered for rated currents of 1, 2, 4, 6 and 10 A. The medical filters, types M5 or M80, limit leakage current to 5 or 80 µA respectively. The M80 version provides increased attenuation of electro-magnetic interference, yet still meets the leakage requirements for non-patient contact devices.
The KFA is approved for 1-10 A at 125/250 VAC, 50/60 Hz, according to UL/CSA () and IEC/EN (). The series is also suited for use in applications as described in IEC 60950, such as measurement, office, security, data communication or similar industrial applications.
The new product line with the types FKH, FKI, FKHD, FKID consists of an appliance inlet type C14 according to IEC 60320-1 with a one- or two pole fuse holder for fuse links 5 x 20 mm and a two pole line switch and a one- or two stage line filter.The mentioned configuration satisfies the most frequent needs of our customers. The drawer of the fuse holder can be configured in different ways and the construction with one pole offers the possibility to mount backup fuses.The two-stage version of the filter suits especially for applications as measurement and audio equipment, where an optimal signal-to-noise ratio is aimed. Likewise the products fit for use in medical application according to IEC 60601-1 as well as for general applications in data communication or similar industrial applications according to IEC 60950.
Schurter recently added a snap-in version of its filtered AC connector designed for use in power supplies rated up to 20Amps at 125 Volts (16A/250V). The compact, integrated unit is designed to improve filter performance in applications with higher power demands.
The AC inlet is designed according to IEC 320-1, type C20, and is combined with a standard or medical grade filter. The combination supplants discrete block filters that are rated between 15-20 Amps. Attenuation is improved by eliminating the bulky wires between the connector and the filter. A better direct path to ground is also achieved. The filter is available with a typical surge withstand (>2.5 kV, L-N), or with added surge capability (>4 kV, L-N).
The C20F is ideally suited for power supplies and distribution units with power ratings up to 3500 Watts. Applications include information technology according to IEC/EN 60950 and medical equipment according to IEC/EN 60601. The C20F is also suited for general industrial applications that would benefit from the convenience of a removable cord.
Power supply requirements are changing dramatically, forcing designers to use smaller, more efficient solutions. Especial attention should be given to the aspects: power density, quality, reliability, efficiency, handling, thermal behavior and electro magnetic compatibility (EMC).The power entry module DC12 from SCHURTER is anIEC/EN 60320-1 appliance inlet C14 with a 1- resp. 2-pole line switch and a line filter, which is designed for the mentioned requirements.The DC12 is made especially for high inrush currents and is suitable for high transient loads. The EMC line filters are available in the standard rated currents for standard and medical versions and the single components are already wired to keep your number of components low in the power supply. The same assembling dimension for 1- and 2-pole line switch version as well as the screw-on and snap-in mounting offers you a variety of designs and optimal safety for your application. The DC12 is approved to 10A, 125/250 VAC, 50/60 Hz according to ENEC, UL, CSA and is suitable for use in equipment according to IEC/EN 60950. The products are perfectly suitable for the usage in sophisticated power supplies especially in IT, medical and measuring as well as in other industrial equipment.
The EC12 combines in a compact way three modules: appliance inlet, line-switch and now – new – with a standard or medical line-filter!The EMV-shield contributes to a troubleless function of your equipment. Due to the wired elements, you can save production costs. The mounting is a lot easier and faster thanks to the practical combining of three singles elements into one only.The EC12 applies for high currents up to 16A, resp. 20A. It is pending the approval VDE up to 16A at 250 Volts and UL&CSA up to 20A at 125 and 250 Volts. The new EC12 is the completion to the already in December 2001 launched EC11.Applications include higher power consuming equipment, like CAD systems, office automation equipment, industrial workstations, base stations, bar coding equipment, and power supplies.
5145 - with filter
6145 - without filter
Schurter's latest power entry innovation combines a filtered AC inlet and circuit breaker, expanding its conventional range to include a manual reset option for primary circuit protection. Circuit breaker options include 1 or 2-pole thermal overcurrent protection, or no bi-metal for 2-pole on/off switching only. Filter options include standard and medical grade with improved performance at higher frequencies. Current ratings range from 1-15 Amps at 250 Volts.
